|
|
What Depth Pallet Rack Do You Need? The 48-Inch Pallet Mistake

What Depth Pallet Rack Do You Need? The 48-Inch Pallet Mistake

Warehouse worker measuring a pallet where it overhangs the front beam of a 42-inch-deep green and orange pallet rack frame

Ask a room of warehouse buyers what pallet rack depth a 48-inch pallet needs and most will say 48 inches. It sounds right, it matches the number on the pallet, and it is one of the mix-ups we see most on new quotes. A standard 48-inch-deep pallet goes on a 42-inch-deep frame, and the 6 inches that seem to be missing are the whole point of the design.

Key Takeaways

  • A 48-inch-deep pallet takes a 42-inch-deep frame.
  • The pallet should overhang the front and rear beams by about 3 inches each, so its weight sits on the beams and not between them.
  • The working rule is frame depth equals pallet depth minus 6 inches.
  • Wire decking is ordered to the frame depth, not the pallet depth.
  • In back-to-back rows, the rear overhang of both pallets eats into the gap between them, which is why row spacer size matters.

Why a 48-Inch Pallet Goes on a 42-Inch Frame

A pallet in selective rack does not sit on the frame. It sits on two beams, one at the front of the bay and one at the back, and the frame depth sets how far apart those beams are. The pallet’s stringers or blocks run front to back, and they carry the load down onto the beams at the two points where they cross them.

On a 42-inch frame, a 48-inch pallet hangs about 3 inches past the front beam and 3 inches past the rear beam. Both beams sit well inside the pallet’s footprint, under solid wood, and the forklift operator has a few inches of forgiveness in either direction. Set the same pallet an inch short or an inch deep and it still rests on both beams.

Now put that pallet on a 48-inch frame. The beams sit at the very edges of the pallet, and the operator has to land it exactly. An inch short and the back edge is barely on the rear beam. Two inches short and the rear of the pallet is hanging in the air. Deeper frames are not stronger for this job, they are less forgiving. How many pallets a day does your crew set at 15 feet, at the end of a shift, with a mast in the way?

The Math: Frame Depth for Common Pallet Sizes

The pallet rack depth rule that covers most selective rack is short: measure the pallet in the direction it goes into the rack, then subtract 6 inches. That leaves 3 inches of overhang front and back. On the standard 48 by 40 pallet, forklifts enter the 40-inch face, so the 48-inch side runs front to back.

Pallet depth (front to back in the rack) Frame depth Typical use
48 inches (48 x 40, 48 x 48) 42 inches (44 also stocked, for a 2-inch overhang) Grocery, general distribution, drums
42 inches (42 x 42) 36 inches Paint, chemicals, telecom
40 inches (48 x 40 turned) 36 inches (34 is not a stock depth) Pallets loaded from the 48-inch side; stringers then run parallel to the beams, so plan on pallet supports or decking

The 48 by 40 is the pallet most buyers are sizing for. Virginia Tech’s research on the pallet industry found that about 35% of the new wood pallets made in the U.S. in 2016 were 48 by 40, and 69% of recycled ones. If your incoming freight looks like everyone else’s, the answer is a 42-inch frame.

When a Deeper Frame Is the Right Call

The minus-6 rule is for good pallets carrying loads that stay on the pallet. Some loads break it, and an honest quote says so.

Product that hangs past the pallet changes the math. A load built 50 inches deep on a 48-inch pallet hangs past the frame by more than the pallet does, and that extra hangs into the aisle or the flue. Loads that are hand-picked from the rack, loose cases, and pallets that are not pallets at all, like slip sheets, crates or skids with no bottom boards, usually need a full deck under them, and sometimes a deeper frame with pallet supports or wire decking that carries the load across the full depth.

That is a decision to make with the actual loads on the table, not from a catalog. Our new and used pallet rack in stock runs in the common frame depths, and the right one depends on what is on the pallets. What does your deepest load measure, product included?

What the Overhang Does to Decking, Aisles and Flues

Three parts of the order follow from the frame depth, and each one trips up buyers who sized from the pallet.

Decking is ordered to the frame. A 42-inch frame takes a 42-inch deck, even though the pallet sitting on it is 48 inches deep. The same goes for pallet supports and safety bars. Ordering wire decking sized to the frame depth is the step people get backward most often after they get the frame right.

The aisle is measured between the pallet faces, not between the frames. Each row of pallets hangs 3 inches into the aisle, so an aisle that measures 120 inches between uprights is about 114 inches between loads. That is the number the forklift has to turn in.

In back-to-back rows, the rear overhangs of both pallets point at each other. Two 42-inch frames joined by 6-inch row spacers leave the backs of the loads touching, with 3 inches from each side filling the gap. With 12-inch row spacers, the same pallets leave a 6-inch opening between them. Depending on rack height and sprinkler design, the fire code your city adopts may call for a flue there, and the fire marshal or sprinkler designer sets the width. Loads that touch can also shove the pallet behind off its rear beam when the next one goes in. Have you measured the gap between the backs of your loads?

Frequently Asked Questions

What is the most common pallet rack depth?
42 inches, because it fits the 48 by 40 pallet that most freight moves on. 36, 44 and 48 inches are the other common depths.

Is a 48-inch frame ever right for a 48-inch pallet?
It can be, when the load is fragile, hand-picked, or poorly palletized and full decking will carry it. Then the deeper frame and the deck work together, and the operator still has to place each pallet with care.

How much should a pallet overhang the beam?
About 3 inches in front and 3 inches in back on a standard selective setup. Less than that removes the forklift tolerance, and much more starts leaving the load unsupported.

Can I put 48-inch pallets on 36-inch frames I already own?
The pallet then hangs 6 inches past each beam, which puts the beams further inside the pallet than the design intends and pushes loads into the aisle and the flue. Check the pallets’ condition and how far the deck boards have to span before trying it, and expect the answer to be a different frame.

Does frame depth change the beam capacity?
No. Beam capacity depends on the beam’s length and profile, and frame capacity depends on the column profile, the bracing and the vertical spacing between beam levels. Depth does matter for stability: a tall, shallow frame, above roughly 6 to 1 height to depth, needs heavier anchoring or row ties.

Get the Depth Right on the First Order

Industry Mart has racked warehouses for customers from Coca-Cola and Wilson to Academy Sports, and for single-bay shops in between. It sells new and used pallet rack in the common frame depths, with new rack only from R-Mark certified manufacturers (certified by the Rack Manufacturers Institute), and installs it across Tennessee and the Southeast under its Tennessee general contractor license (#86487). Frames, beams and decking are on display in the 30,000-square-foot showroom in Cookeville.

Send us your pallet size, which side the forks enter, and the height of your tallest load. Ask for a pallet rack quote or call 931-537-3161, and we will confirm the frame depth before anything ships.

Measure the Pallet, Then Subtract Six

Measure the pallet the way it goes into the rack, check the deepest load on it, and subtract 6 inches. Order the decking to that frame, measure the aisle between loads, and size the row spacers for the gap the sprinkler design needs. Rack that is 6 inches shallower than the pallet is not short. It is built so the pallet lands on steel every time.

Related Articles

Do you need help
Our team of experts can help you with a comprehensive plan for an efficient and safe working environment. Give a call today!